Churchwood Gardens by Bryden Wood Press Release

The cyclone will be pulled up to ensure less dirt is trapped in the bin.. Push the cyclone back down into its regular position.

Your Gtech Multi Mk2 is now ready to use!.re-insert the bin.

replacing the filter.Running the Gtech Multi Mk2 without a filter could cause permanent damage to the vacuum cleaner’s motor.. What Should I Do If My Gtech Has Poor Suction?.Low suction is nearly always caused by a blocked filter or an overfilled bin.

So, these are the issues to check for first..However, if cleaning the filter hasn’t fixed a low-suction problem, there is probably a blockage elsewhere in the vacuum.

The most likely culprits are the main tube, outlet from the bin (you’ll need to remove the bin to access this), and inside the tools.. It’s also possible that hair has become tangled around the Power Brush brushroll.

To fix this issue,.As a general rule, you should only use water on components that you can verify are completely plastic without any electronics (e.g.

the dust canister).. With that out of the way, here’s how to clean the main body of your Dyson V7:.Carefully rinse the dust canister in cold water to remove dust and dirt.

You can also use a damp cloth to wipe it down.make sure you don’t get the two electrical contacts on the upper rim wet..